Router Table Digital Height Readout

At the Melbourne show, on the Professional Woodworkers Supplies stand, you will be able to see a prototype of the latest Wixey digital device, which gives you a remote readout for the router bit height on a router table.  Basically, it connects to the table, and as you change the height, the readout gives you the setting, to within 1/10mm.  The scale however is not directly on the device- it is connected to some Cat5 cable (ie ethernet/network cable) so you can position the readout somewhere that is convenient for you to see.

It will currently be fitted to the UniLift, which is what (as I understand) is the sort of router lift it was originally designed to work with (although not specifically the UniLift, so we’ve been brainstorming on the neatest solution for that).  Now, the idea that was arrived at has a massive implication, and I have been looking closely at it today.

As far as I can tell, it should be relatively easy to have this unit fitted directly to a Triton router.

A Triton router with a remote digital height readout, accurate to 1/10mm!  Think about setting up for a job – insert router bit (such as a dovetail bit), zero the scale, then wind the bit to EXACTLY the right height as determined from a previous job, and start routing.  Repeatability, and ease of setup.

Anyway, that’s what I have been working on in my head this morning – thought I’d share it with you.

%d bloggers like this: