Do you wanna build a snowman?

Do you wanna build a wood box?
Come on, let’s cut a dovetail!
You don’t even need a saw
Head to the shed door
There’s a jig does does it all

We used to be confused and stressed
And now we’re not
I can tell you why!

Do you wanna build a wood box?
It doesn’t have to be a wood box…

…………………………..
Do you wanna build a wood box?
Or make some drawers?
I think some insight is overdue
I’ve started taking to
Cutting dovetails for them all

It becomes so easy
Just routing the pins and tails

……………………………..

Do you wanna cut a dovetail?

For long time readers of Stu’s Shed, it is no surprise that I am a big fan of the Gifkins Dovetail jig, and not because it is Australian made.

My position on the Gifkins has been formed both from a long experience with the jig, and by my experiences with other dovetail jigs (and more broadly, my attempts to cut dovetails!)

I’ve tried Leigh, Jet, Gifkins and Incra systems for cutting dovetails, and although each produce dovetail joints, (most) as accurately and as tight as you’d like, only the Gifkins is so intuitive that you can pick it up 12 months later, and still work out how to use it, without referring to the manual (let alone in intimate detail).

For a long time, I have been using the standard jig, which can cut dovetails up to about 300mm long, but it is the jumbo dovetail that is of particular note.  It can cut dovetails up to 480mm, which pushes it into a different league, and allows the creation of boxes, the size of blanket boxes, or tool chests.

The templates for the jumbo series have been modified, with an increase of 10mm or so between pins compared to the standard jig, which is to give a more handcut look to the spacing.  Depending on the template in use, the Gifkins can handle stock thicknesses from 4mm through to 22mm.  (H templates are 4mm to 10mm, A series are 7mm to 13mm and B series are 14mm to 22mm).

I demonstrated the jig again today, and within a few minutes, we had a perfectly tight dovetail joint – it is that easy.

If you are wanting to produce some dovetail joints, and either don’t know where to begin, or which jig to choose, the Gifkins is definitely worth serious consideration.

 

One Response

  1. Couldn’t agree with you more. I built a twin router table with a Triton router each end, I set one up for the pins and other up for the tails, really makes box making a breeze with so much ease. This wouldn’t be possible with any other jig but the Gifkin

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: