Blasterboyz Plaque

One thing I had yet to try on the CNC router, was other materials, and specifically aluminium.

As much as ‘they’ say that some Australian timbers are harder, and that I have both cut and routed aluminium manually, it was still with trepidation that I mounted a plate and engaged the CNC router.

There is more than hardness to the effects of machining different materials. Different materials form chips in different ways, different amounts of heat generation, and in the case of aluminium, a tendency for waste material to try to weld itself to the cutter if chips are not cleared adequately.

It is for this reason that aluminium router bits tend to be single fluted, allowing a much larger flute for more aggressive chip clearance.

Had a project come up that made it a great excuse to give it a try. The Blasterboyz are a group of JetSki riders, with a common tool of the trade- the Yamaha WaveBlaster. They often ride socially, right through to competitive rides.

They have asked if a plaque can be made, which will be used as a bit of a trophy. I won’t tell you what the trophy will actually be called – too politically incorrect!, but it translates as “go hard, or go home”

I set up to try a pretty standard V groove bit (before risking one of my soli carbide bits), and played around with feed and plunge rates to get one that cut sufficiently, without chatter or causing the CNC to move faster than the cutter could cope. The CNC Shark isn’t the most rigid, so when push comes to shove, there is some flex, which results in an imprecise job. The solution is to ensure the feed speed chosen suits the cutter and material.

So as a first attempt, this is the result. With some refinement, and a better, sharper, dedicated cutter this could be quite satisfactory. If the opportunity arose, it would also be very interesting to see a lasered result.

20140414-222424.jpg

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: