A Cool Nova Tool

For regular followers, you will remember my little jaunt over to the land of the red, white and blue, to Denver Colorado to appear on Cool Tools.  Haven’t forgotten the experience, from the flight on the A380 to getting around Denver, being on the show, meeting and working with Chris Grundy, visiting Rockler, and, well, the whole experience.

It all jumped back in mind when I was reading up about a tool sitting out in the shed, and heard it was about to be featured on….Cool Tools!

The tool in question: the Nova Comet II midi lathe, from Teknatool.

Nova Comet II

It is a very interesting addition to the midi lineup, and simply based on name, it has quite a pedigree.

There are a few other lathes in the same niche, so lets pull them all out, dust them off and see what we have here.

Jet Midi, Variable Speed

Jet Midi, Variable Speed

Carbatec Midi, Variable Speed

Carbatec Midi, Variable Speed

There are others, but these are the ones I have some familiarity with.

Must admit, I didn’t have variable speed on a lathe until I got my DVR.  My old Jet midi lathe didn’t have the feature.  Variable speed is pretty cool, and means you can quickly change the speed to suit what you are doing at the time, rather than stopping to change the belts (or simply ignoring the speed isn’t ideal, mores the point!)

Both the Jet and the Carbatec have the variable speed tacked onto the side, as if the lathe was designed without and on certain machines they get the upgrade.  For both the Jet and Carbatec, this is pretty much the case.

The Comet has it designed to be much more integrally part of the lathe from the outset.  This may just be an aesthetic, but it also means there isn’t a speed control box sticking out the side.  Dust does build up, and objects do fall or hit things that are sticking out.

While we are looking at it, some other specs, side by side

Specification Comet II Jet Carbatec
Price $639 $849 $799
Speed 250 – 4000 200 – 4300 250 – 3600
Swing over bed 300mm 304mm 355mm
Distance between Centres 419mm 510mm 430mm
Reverse Yes No No
Weight 32kg 45kg 39kg

All have 3/4HP motors, indexing heads

So in the first rounds, the Comet II really is holding its own.  Especially given the price.

There are some aspects that do come in though, and this is probably price-related.  I like cams on the various movable items, and although it is only the tailstock, I would have preferred it to have been a cam.

Although the finish on all user areas is good, there are some rough castings underneath.  The foundry really needs to invest in an angle grinder.  It wouldn’t have been hard to tidy up the casting a bit more underneath.

Toolless access to the belt drive.

Other than those points, there are some distinct advantages too!

Reversible. The other lathes can’t run backwards! (Correct me if I am wrong (update – the Carbatec does))
Excellent access to the belt drive – much better than either of the others.
Ability to add accessories, such as a grinder (for sharpening chisels during turning)

It may be a bit lighter (weight is a bonus for lathes), but not too much so, and it does make it more transportable.

I’ll revisit the accessories when they arrive, but the concept is very interesting!

When I have a chance to really put the lathe through its paces, I will feed those experiences back.  The initial testing didn’t reveal any issues.

So a very promising addition to the lineup, and at a rather cost-competitive price point!  You can afford to add a Nova G3 chuck and still be ahead.  Don’t forget, the 4 jaw self-centering chuck which is now the standard for wood turners was invented by Teknatool.

One Response

  1. I purchased the Nova Comet II partially based on your review. I found major flaws with assembly and machining that I was able to correct, but there are some inherent design issues that tend to limit the lathe to well balanced material and light work. The low speed pulley has so little belt contact that the 3/4 HP motor cannnot be utilized due to belt slippage. The close mounting holes at the headstock end do not allow for adequate support with the supplied feet for any unbalanced work and lathe needs to be securely bolted to a bench or board that can be clamped down (there is no provision to clamp to the lathe direct) as instructed in the manual. The electrical controls seem to work well, but a dust deflector for the control box might be in order to keep dust out of the open top. Additionally, I had to grind clearance under the tailstock center casting to allow the locking plate to lock to the ways, the motor bolts to plate were loose, the motor pulley was not fully seated (had to clean out paint in pulley and use emery cloth to reduce shaft slightly).

    The midium speed does an adequate job, but again there is belt slippage turning 9″ green bowls.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 1,737 other followers

%d bloggers like this: